|
Integrated Systems Health Management (ISHM)
Monday, June 22, 2009 9:45am - 12:00pm
Organizer: (Mr. Mark Derriso, AFRL/RBSA) |
| 9:4 5am - 9:55 am |
Workshop Intro
(Mr. Mark Derriso AFRL/RBSA) |
| 9:55 am- 10:25 am |
ISHM Overview Betty Glass
(Bruno Jambor Lockheed Martin, DeciTek) |
| 10:25 am - 10:55 am |
Propulsion Health Management
(James Larkin Pratt & Whitney) |
| 10:55 am - 11:25 am |
Structural Health Management
(Christopher Davis Boeing) |
| 11:25 am - 11:55 am |
Thermal Protection Systems Health Management
(Robert Hyers University of Massachusetts) |
| 11:55 am - 12:00 am |
Wrap-up |
Thermal Protection Systems Workshop
Monday, June 22, 2009 9:45am - 12:00pm
Organizer: (Mr. Ken Davidson, AFRL/RX) |
| 9:45am - 9:50am |
Welcome & AFRL/RX Overview
(Mr. Kenneth Davidson, AFRL/RXLN) |
| 9:50am - 10:10am |
AFRL/RB Overview
(Andy Swanson, AFRL/RBSA) |
10:10am - 10:30am |
Reusable Booster Integrated Demo
(Dr. Jeff Zweber, AFRL/RBSD) |
| 10:30am - 10:50am |
Heat Pipe Cooled Leading Edge
(Dr. Suraj Rawal, Lockheed Martin) |
| 10:50am - 11:10am |
Titanium TPS
(Dr. Yoji Kosaka, Timet) |
11:10am - 11:30am |
Superalloy TPS
(Dr. Don Shih, Boeing) |
| 11:30am - 11:50am |
Ultra High Temperature Ceramics
(Dr. Mike Cinibulk, AFRL/RXLN) |
11:50am - 12:00pm |
Technology Gaps Discussion
(Donna Ballard, AFRL/RXLM) |
| |
Ceramic Composites Affordability
Monday, June 22 1:00 pm - 4:45 pm
Workshop Organizer: Mr. Doug Frietag |
| 1:00 pm - 1:30 pm |
The Ceramic Composites Affordability and Producibility (CCAP) Initiative
(Paul PiscipoThe Piscopo Group, LLC) |
| 1:30 pm - 2:00 pm |
Pratt & Whitney Current and Future CMC Requirements
(Charlie Logan, P&W Rocketdyne) |
| 2:00 pm - 2:30 pm |
Fundamental Development Needs for Ceramic Composites for Primary and Secondary Structure
(Mitch Petervary, Boeing) |
| 2:30 pm - 2:45 pm |
Break |
| 2:45 pm - 3:15 pm |
Ceramic Matrix Composites Manufacturing Experience
(Bob Klacka, GE Ceramic Composite Products) |
| 3:15 pm- 3:45 pm |
Ceramic Matrix Composites Status
(Andy Lazur, Goodrich High Temperature Composites) |
| 3:45 pm - 4:15 pm |
Ceramic Matrix Composites for High Temperature Applications
(Steve Atmur, ATK COI Ceramics, Inc) |
| 4:15 - 4:45 pm |
Domestic Manufacturing of SiNC and Stoichiometric SiC Structural Ceramic Fibers
(Ed Pope, MATECH/Global Strategic Materials) |
| |
Joint Technology on Hypersonics
Monday, June 22 1:00 pm - 4:45 pm
Workshop Organizer: Mr. Doug Frietag |
1:00 pm - 1:30 pm |
Joint Technology Office on Hypersonics Overview
(Dr. Jimmy Kenyon, Office of the Deputy Under Secretary of Defense) |
| 1:30 pm - 2:00 pm |
U.S. Navy EM Railgun
(Dr. Arthur Mabbett, Naval Surface Warfare Center Dahlgren) |
| 2:00 pm - 2:30 pm |
High Speed and Robust Scramjet Propulsion Advancements
(Dr Robert Mercier, AFRL Propulsion Directorate) |
| 2:30 pm - 2:45 pm |
Break |
| 2:45 pm - 3:15 pm |
Overview of the Air Force's Responsive Space Access Activities
(Mr. Bruce Thieman, AFRL Air Vehicles Directorate) |
| 3:15 pm- 3:45 pm |
The Army's Advanced Hypersonic Weapon
(Dr. Gerald Russell, US Army Aviation and Missile Research Development and Engineering Center) |
| 3:45 pm - 4:15 pm |
HyFly hypersonic weapon technology
(Mr. Gil Y. Graff, Office of Naval Research, Naval Air Warfare and Weapons Department) |
| 4:15 - 4:45 pm |
Panel Discussion - How can the JTOH Better Serve the Hypersonics Community?
(Dr. Jimmy Kenyon, et al) |
| |
Corrosion Planning Workshop
Monday, June 22, 2009 2:45pm - 4:45pm
Organizer: (Mr. Robert Herron AMSRD) |
Corrosion Prevention and Control Planning for Weapon Systems
(Mrs. Joan R. Smith, AMSRD) |
Primer on Corrosion Mechanisms
(Mr. Ramesh Sharma, Raytheon Missile Systems) |
Introducing Products to DoD Utilizing Specifications and Standards
(Ms. Janice K. Lomness, PHd, NASA-KSC) |
| |
Aerothermal Ground Testing Workshop
Tuesday, June 23 1:30 pm - 5:30 pm
Workshop Organizers:
(Dr. Gerald Russell, USA ARMDEC;
Dr. Keith Bowman, AFRL; Mr. Mark Smith, AEDC) |
| 1:00 pm -2:00 pm |
Introduction and Overview of Methodology
(Dr. Gerald Russell, USA ARMDEC;
Dr. Keith Bowman, AFRL; Mr. Mark Smith, AEDC) |
| 2:00 pm - 2:30 pm |
Invited Topic
(Mr. Tom Fetterhoff, Capt. Rod Koch, AEDC) |
| 2:30 pm - 5:30 pm |
Arc Heater Facility Presentations** |
| 2:30 pm - 3:10 pm |
USAF (DoD) AEDC Arc Jets
(Lt Alex Henning, AEDC 718th TS) |
| 3:10 pm - 3:30 pm |
BREAK (20 minutes) |
| 3:30 pm - 4:10 pm |
NASA ARC Arc Jets
(Imelda Terrazas-Salinas) |
| 4:10 pm - 4:50 pm |
NASA JSC Arc Jets
(Chris Madden, or Steve Del Papa) |
| 4:50 pm - 5:10 pm |
NASA LaRC HYMETS Arc Jet
(Scott Splinter) |
| 5:10 pm - 5:30 pm |
BOEING LCAT Arc Jets
(Jim Ledesma) |
| |
|
** Facility Briefs – Arc heater facility briefs should include information on topics below. The objective is to provide essential information supporting ground test customers in design of aerothermal materials/ structures evaluations. Information on facility characterization is of particular importance in defining actual test environments on customer samples. Pending/planned facility or infrastructure modifications/upgrades are also of interest.
SafeNet delivery of presentation materials to the conference organizer (GDIT) for inclusion in the Symposium electronic proceedings should be coordinated through Michelle Williams, symposium coordinator.
Suggested Topics for Inclusion:
- Overview of Facility and Infrastructure
- Facility configurations
- Nozzles available: throat-exit diameters and nozzle type(s) (conical, contoured)
- Test rhombus (measured flow maps)
- Typical sample sizes
- Design chamber pressure/enthalpy maps for the given nozzles
- Altitude chamber capabilities
- Run times per sting, run time constraints
- Calorimetry/flow probes used for flow characterization
- Simulation maps for surface pressure, heat flux on generic test articles
- CFD coupled to data comparisons
- Typical test sting configurations
- Water-cooling capabilities for test fixtures (flow rates, pressures)
- Measurement diagnostics available (surface temp,wavelengths/TCs, ablation rate sensors, pressures, phase change, etc.)
- Programs/materials tested at the facility
- Current/projected upgrades (also show links to Hypersonic T&E BAA, CTEIP)
- Typical costs for test series
- Scheduling requirements
- Technical/financial POCs for facility test planning
- Technical
- Instrumentation
- Test Operations
- Financial/contracting
|
| |
|
