Tour

 

Return to USASYMPOSIUM.COM

Poster Session

Be sure to take time to peruse the Grand Ballroom at the Hyatt Regency where you will find a vast array of technical posters by your colleagues on the leading edge of nanotechnology innovation.  Participating posters include:

 

Fundamental Investigation of Defect Thermodynamics, Evolution and Fracture Mechanics of Nanoscale Multilayered Structures
Ashfaq Adnan, University of Texas at Arlington

CONTACT and the Armchair Quantum Wire Project
Jack Agee, Rice University

Paper-based Biofuel Cells: Passive Fuel and Air-fed Designs
Plamen Atanassov, University of New Mexico

3-D Enzymatic Nanomaterial Architectures for Energy Harvesting
Scott Banta, Columbia University

Ultrathin Iron Oxide Nanowires
Yuping Bao, The University of Alabama

Increasing the Efficiency of Dye-Sensitized Solar Cells by Optimizing the Dye Adsorption Process
Giorgio Bazzan, UES, Incorporated

Bio-inspired Hierarchical Vascular Networks
Kristopher Behler, US Army Research Laboratory

Directed Assembly of Nanoparticles at High Loadings in Ordered Polymers
Frederick Beyer, US Army Research Laboratory

Managing Your Environmental, Health & Safety Risk:A Guide for Nano Companies
Harry Bushong, Nanotox

Lightweight Nanomaterial Shielded Cables and Harnesses for Space & Missile Applications
Megan Caprio, San Diego Composites, Incorporated

Transformation of the Interphase in Compliant Polymer Nanocomposites by Dynamic Stressing
Brent Carey, Rice University

Barrier Architecture IR Detectors for Space Applications
Vince Cowan, Air Force Research Laboratory

Applications of GUMBOS for Nanotechnology
Jonathan Dumke, Louisiana State University

Printed Wideband Metamaterial Antennas for Ballistic Panels
Richard Fink, Applied Nanotech, Incorporated

Tagging, Tracking, and Locating Using Semiconductor Nanocrystals
Daniel Gallagher, Air Force Research Laboratory

Nano-biotechnology for Lightweight Portable Sensor Device Development
Mark Goltz, Air Force Institute of Technology

Use of Stabilized Bimetallic Nanoscale Zerovalent Iron to Destroy Water Contaminants
Mark Goltz, Air Force Institute of Technology

From Hard Coatings to Thermoeletrics: Effects of Nanostructure on Fundamental Physical Properties of Transition Metal Nitride, Oxide, and Oxynitride Alloys
Brandon Howe, Air Force Research Laboratory

Highly Efficient Thermoelectric Materials: New and Innovative Approach and Materials
Daryush Ila, Fayetteville State University

Intrinsically Conductive Polymer Coating for Reduced ESD Sensitivity
David Irvin, Systems & Materials Research Corporation

Melt Extrudable Nanocomposite Liquid Crystalline Polymer Films
David Irvin, Systems & Materials Research Corporation

Experimental Method to Account for Edge Effects in
Nanoindentation Measurements

Joseph Jakes, United States Forest Service &
University of Wisconsin-Madison

Nanoindentation as a Local Probe for Mechanical Spectroscopy
Joseph Jakes, United States Forest Service &
University of Wisconsin-Madison

NMR Characterization of Canopy Dynamics in Nanoscale Ionic Materials
Michael Jespersen, UES, Incorporated

Phase Behavior of Two-component Thiol SAMs on Immobilized Gold Nanoparticles Characterized by XPS
Michael Jespersen, UES, Incorporated

In Vitro Biological Assays to Evaluate and Predict Uptake and Toxicity of Engineered Nanoparticles
David Johnson, US Army Engineer Research and Development Center

Identifying Potential Environmental, Health, and Safety Concerns from Engineered Nanoparticles Using a Comprehensive Environmental Assessment
David Johnson, US Army Engineer Research and Development Center

Functional Conductive Nanofibers as Active Components in Sensors for Single Molecules
Ishrat Khan, Clark Atlanta University

Oleophobic Coatings for Self-Cleaning, Fluid Resistant Textiles
Bryan Koene, Luna Innovations Incorporated

Anti-icing Properties of Superhydrophobic Surfaces
Hoon Joo Lee, North Carolina State University

Paper Based Point of Care Biosensor for Toxic Exposure Assessment
Chen-zhong Li, Florida International University

Novel Nanostructures by Focused Ion Beam Guided Anodization
Kathy Lu, Virginia Tech

Titania Nanoparticle Suspension and Template-assisted Fabrication of Micron Feature Arrays
Kathy Lu, Virginia Tech

Engineering of Metasurfaces to Control Molecular Interactions via Surface Plasmons
Michael Miller, Southwest Research Institute

Applications of Chip-scale Integrated Nanoporous Energetic Silicon
Christopher Morris, US Army Research Laboratory

Light Harvesting Photosynthetic-Nanocrystal Assemblies
Rajesh Naik, Air Force Research Laboratory

Phage Display Peptides Binding to Graphene, Graphite,
and Carbon Nanotubes

Rajesh Naik, Air Force Research Laboratory

Silica Shelled Metal Nanoparticles for Defense Applications
Steven Oldenburg, nanoComposix, Incorporated

The Armchair Quantum Wire
Alvin Orbaek, Rice University

Resources for Preclinical Characterization of Nanomaterials for Cancer Diagnosis, Imaging, and Therapy
Nicholas Panaro, SAIC-Frederick, Incorporated

Discrete and Soluble Plasmonic Architectures via Directed Assembly of Gold Nanorods
Kyoungweon Park, UES, Incorporated

Photocatalytic Activity of Novel Nanomaterials: Study of Detoxification of Organic Compounds
Dilip Paul, Pittsburgh State University

Exploiting Nanostructured Materials for Chemiresistive Vapor Sensing
Keith Perkins, Naval Research Laboratory

Optimization of Carbon Nanotube-based Wires
Vasiliki (Vicky) Zorbas Poenitzsch, Southwest Research Institute

Engineered Reactive Metal Oxyhydroxides (ERMO) for Detection and Decontamination of Toxic Reagents
Shyamala Rajagopalan, NanoScale Corporation

Supercapacitor Based on Graphene – Conducting Polymer Nanocomposites
Manoj Ram, University of South Florida

Computational Studies of Corrosion Processes and Inhibition Mechanisms: Surfaces and Interactions
Erik Sapper, The Boeing Company

Characterization of Nanofilled Insulation Formulations for Magnet Wire
Dan Schweickart, Air Force Research Laboratory

Towards Nanoscale Gas Sensor Design: From Emissions Control to Trace Detection and Discrimination of Explosives
Praveen Sekhar, Washington State University

Commercially Manufactured Aligned Carbon Nanotube Arrays, Threads, Yarns, Ribbons and Sheets for Defense Applications
Joe Sprengard, General Nano, LLC

Carbon Nanotube-based Radiation Sensing Chemiresistors
Stephen Straight, Signature Science, LLC

Aqueous Interactions between Munitions Constituents and Nanomaterials: Environmental Fate Implications
Jacob Stanley, US Army Research & Development Center

Functionalized Polymer Brushes for Selective Cell Growth and Detachment
Ashley Sutherland, Air Force Research Laboratory

Actively Tuned VO2 Metamaterials
Seth Taylor, Northrop Grumman Aerospace Systems

Design of Nonlinear Optical Antennas Using Numerical Optimization
Seth Taylor, Northrop Grumman Aerospace Systems

Solution-based Processing of Functional Materials and Films via Nanoparticle Assembly
Seth Taylor, Northrop Grumman Aerospace Systems

Improved Temperature Stability of Enzymes for Use in Biological Fuel Cells
Yevgenia Ulyanova, CFD Research Corporation

PopTube Technology - a Ultrafast Approach Growing Carbon Nanotube (CNT) on Engineering Materials
Jialai Wang, University of Alabama

Metal Oxide Modified ZNO Nanowire Arrays for Highly Sensitive and Selective Gas Detection
Weilie Zhou, University of New Orleans